DIN 84 Slotted
Cheese Head Screws
Manufacturer Mumbai
What Is a DIN 84 Slotted Cheese Head Screws
A “cheese head” screw gets its name from the head profile — a short cylinder with a flat top and straight sides, resembling a wheel of cheese, as opposed to the domed profile of a pan head or the tapered underside of a countersunk screw. DIN 84 is the standard that defines this head shape paired with a single straight slot drive, and it’s stayed one of the most commonly specified general-purpose machine screws precisely because there’s nothing complicated about it.
The low, flat-sided head sits cleanly against a surface without needing a countersink, and the slotted drive tightens reliably with a basic flat-blade screwdriver — no need for a powered driver or a specific bit profile, which matters in field service, appliance repair, and any setting where the tool on hand might just be whatever’s in the drawer. That simplicity is the whole point: a DIN 84 screw does one job, does it predictably, and is inexpensive to manufacture and stock in volume.
Akbar Fasteners Pvt. Ltd. manufactures DIN 84 cheese head screws in-house at our Mumbai facility, under ISO 9001:2015, with full mill test documentation, and exports this range to over 50 countries.
Where DIN 84 Screws Genuinely Earn Their Place
Simple, Reliable Slotted Drive
Tightens with a basic flat-blade screwdriver — no specific bit profile needed, which matters in field service and general repair settings.
Low-Profile Cylindrical Head
Sits flat and low against the surface without needing a countersink, keeping a clean profile in electrical panels and appliance housings.
Full Size & Weight Reference
A published dimension and weight chart lets you plan quantity and freight before an order is placed, not after.
Wide Material & Finish Choice
Carbon steel and stainless steel available across common property classes, in bulk quantities for OEM and general assembly needs.
DIN 84 Cheese Head Screw Dimension & Weight Chart
Standard nominal dimensions and approximate weight by thread size — head diameter (dk), head height (k), and slot width (n) are the figures most buyers check first for driver clearance and panel cutout fit. Weight is given per 100 pieces at a 12mm reference length; actual weight scales with the ordered length and should be recalculated for your final bill of materials.
| Thread Size (d) | Head Dia. (dk) | Head Height (k) | Slot Width (n) | Slot Depth (t) | Approx Weight/100pcs @ L=12mm |
|---|---|---|---|---|---|
| M2 | 3.8 mm | 1.3 mm | 0.5 mm | 0.6 mm | ~0.09 kg |
| M2.5 | 4.5 mm | 1.6 mm | 0.6 mm | 0.8 mm | ~0.15 kg |
| M3 | 5.5 mm | 2.0 mm | 0.8 mm | 1.0 mm | ~0.23 kg |
| M4 | 7.0 mm | 2.6 mm | 1.2 mm | 1.3 mm | ~0.42 kg |
| M5 | 8.5 mm | 3.3 mm | 1.2 mm | 1.6 mm | ~0.70 kg |
| M6 | 10.0 mm | 3.9 mm | 1.6 mm | 2.0 mm | ~1.08 kg |
| M8 | 13.0 mm | 5.0 mm | 2.0 mm | 2.5 mm | ~2.05 kg |
| M10 | 16.0 mm | 6.0 mm | 2.5 mm | 3.0 mm | ~3.35 kg |
| M12 | 18.0 mm | 7.0 mm | 3.0 mm | 3.5 mm | ~4.90 kg |
Figures shown are representative reference values in steel for quick planning purposes and may vary slightly by manufacturer tolerance and length ordered. Please confirm exact dimensions against the current DIN 84 standard document or your engineering drawing, and request our certified dimensional data sheet, before finalizing a purchase order.
Slotted & Machine Screw Range
Slotted Cheese Head Screws
General-purpose slotted machine screws in carbon and stainless steel, M1.6 to M20, custom length to drawing.
DIN 963Slotted Countersunk Screws
Flush-fitting countersunk head screws for a completely flat surface finish after installation.
DIN 964Slotted Raised Countersunk Screws
Countersunk base with a domed raised top for a decorative finish on visible fastening points.
Support HardwareFlat & Spring Washers
Matching washers supplied to complete a full fastening assembly to your specification.
DIN 84 Technical Overview
Available Materials
- Carbon Steel Standard Offering
- Stainless Steel A2 / A4 on Request
- Brass Electrical Applications
- Surface Finish Zinc Plated / Black Oxide
- Custom Material To Specification
Mechanical Grades
- Property Class 4.8 General Assembly
- Property Class 8.8 Higher Load Applications
- Stainless A2/A4 Corrosion Resistant
- Threading Metric Coarse (Standard)
- Testing MTC / NABL on Request
Available Dimensions
- Thread Diameter M1.6 – M20
- Length Custom to Drawing
- Head Style Cheese Head, Slotted
- Drive Type Single Straight Slot
- Packaging Loose / Boxed / Bulk
Application Areas
Wherever a simple, reliable general-purpose fastening screw is needed.
Electrical Panel Assembly
panel component mounting
Home Appliance Assembly
fastening in appliances
Light Machinery & Instrumentation
small mechanical devices
Field Service & Repair
basic flat-blade screwdriver
Furniture & Cabinet Hardware
furniture and cabinetry
Packaging Machinery
guard panel fastening
Electronics Enclosures
for equipment housings
General OEM Assembly
volume manufacturing
Standard Export Documentation
Prepared as standard practice for every cheese head screw shipment.
Mill Test Certificate (MTC)
Material composition and mechanical property verification for every production batch.
Certificate of Conformance
Confirms the shipment matches the purchase order specification, size, and grade in full.
Certificate of Origin (COO)
Confirms India as country of manufacture for destination customs purposes.
Commercial Invoice & Packing List
Itemized value, Incoterm, and detailed carton/weight breakdown for customs clearance.
Dimensional Data Sheet
Certified head diameter, height, and slot data against DIN 84 available on request before order confirmation.
Bill of Lading
Ocean or air freight shipping document confirming carrier, mode, and consignee details.
Internationally Recognised Standards Coverage
Related Fastener Grades & Standards
DIN 261 T-Head Bolts
T-slot clamping bolts for machine tool tables, with a matching standard dimension and weight chart.
View DIN 261 →DIN 258 Taper Pins
Removable, externally threaded taper pins for precision alignment applications.
View DIN 258 →Stainless Steel 316 Fasteners
Corrosion-resistant option for machine screws and general fastening in washdown or humid environments.
View SS 316 →Top Nickel Fasteners Manufacturer
See our full in-house nickel alloy manufacturing and documentation capability.
View Manufacturer Page →Send Us Your
Size, Length & Quantity
Tell us your thread size, length, material preference, and quantity — we’ll confirm the correct DIN 84 specification and issue a certified dimensional data sheet with your quote. Akbar Fasteners Pvt. Ltd. responds within 24 hours.
Sales: +91 724 0000 733 · Support: +91 800 9315 333 · sales@akbarfasteners.in