FF-S-210
Machine Screws
Mumbai · India
What FF-S-210 Actually Covers
FF-S-210 sits in a genuinely different spot than the narrower federal specs we manufacture to — where FF-W-84, FF-W-92, and FF-W-100 each address one specific washer function, and FF-P-386 addresses one specific precision pin function, FF-S-210 covers general-purpose machine screws across a wide range of head styles and drive types. It’s the specification a federal purchase order references when the requirement is simply “a standard machine screw,” rather than something with a specialized function.
That breadth is exactly the point. Machine screws under FF-S-210 thread into a tapped hole or matching nut, in a range of head styles chosen for appearance, clearance, or driving preference rather than for a specialized mechanical function like locking or precision location. Getting the head style and drive type right for the actual assembly and tooling on hand matters more here than picking between exotic variants — which is why choosing the correct combination is the practical decision buyers actually need help with.
Akbar Fasteners Pvt. Ltd. exports to over 50 countries, and our machine screw range is manufactured across the head style, drive type, and material combinations most commonly specified, verified under our ISO 9001:2015 quality system.
Where FF-S-210 Genuinely Applies
Broad General-Purpose Coverage
Multiple head styles and drive types under one federal specification for everyday machine screw needs.
Unambiguous Government Reference
Removes ambiguity in federal purchase orders needing a defined, standard machine screw specification.
Multiple Material Options
Steel, stainless steel, and brass options across the same head/drive combinations.
Verified Dimensional & Thread Quality
Batch inspection confirms thread class and head dimension compliance for every lot.
Drive Type Options Explained
Single-Slot Drive
The simplest, oldest drive type — cost-effective, but more prone to cam-out under power driving.
Phillips-Type Drive
Cross-shaped recess enabling faster power-driven assembly with reduced (but not eliminated) cam-out risk.
External Hex Drive
Wrench or socket-driven external hex head, for higher torque application than a slotted or cross-recessed head allows.
Flat / Oval / Round / Pan / Fillister
Head profile selected for flush countersunk fit, decorative appearance, or maximum bearing surface as required.
Head Style Selection Guide
The right head style depends on the assembly’s clearance, appearance, and countersinking requirements. This table is the quick reference we use with buyers before quoting.
| Head Style | Profile | Typical Use Case |
|---|---|---|
| Flat Head | Countersunk, flush | Where a flush surface is required |
| Oval Head | Countersunk with domed top | Finished appearance over a countersink |
| Round Head | Domed, no countersink | General-purpose, surface-mounted |
| Pan Head | Low domed profile | Most common general-purpose head style |
| Fillister Head | Raised cylindrical profile | Higher torque tolerance, recessed applications |
FF-S-210 Specification Details
Materials We Manufacture In
- Carbon Steel Plain / Zinc Plated
- Stainless Steel 304 / 316
- Brass Decorative / Electrical Use
- Finish Plain / Nickel / Zinc / Black Oxide
Thread Standards
- Inch Series UNC / UNF
- Metric Equivalent Available to Drawing
- Thread Class 2A / 3A
- Testing Thread Gauge Verified
Available Dimensions
- Nominal Size #0 – 3/8″ (Inch Series)
- Length Custom to Application
- Custom Sizes On Request
- Matching Nut Standard Machine Screw Nuts
Application Areas
Wherever a general-purpose machine screw with a federal specification reference is required.
Defense & Government Equipment
general machine screw needs
Electrical Panels & Enclosures
blocks, and panel assembly
Machinery & Equipment Assembly
and housing fixing
Government Infrastructure Hardware
facility hardware needs
Rail & Transit Equipment
authority procurement
Naval & Marine Equipment
procurement contracts
Furniture & Cabinet Hardware
fixing for hardware assembly
General Federal Contract Hardware
federally specified projects
Standard Export Documentation
Prepared as standard practice for every FF-S-210 machine screw shipment.
Mill Test Certificate (MTC)
Heat number, chemical composition, and mechanical property verification for every lot.
Certificate of Conformance
Confirms the shipment matches the purchase order head/drive/material specification in full.
Thread Gauge Inspection Report
Verification of thread class conformance for correct nut and tapped-hole engagement.
Certificate of Origin (COO)
Confirms India as country of manufacture for destination customs purposes.
NABL Accredited Test Reports
Independent mechanical and dimensional testing available on request for critical applications.
Commercial Invoice & Packing List
Itemized value, Incoterm, and detailed carton/weight breakdown for customs clearance.
Internationally Recognised Standards Coverage
Related Fastener Grades & Materials
FF-W-84 Key Washers
The countersunk finishing washer companion, often paired with flat or oval head machine screws.
View FF-W-84 →FF-W-100 Flat Washers
The general-purpose flat washer federal specification for load distribution.
View FF-W-100 →FF-P-386 Straight Pins
Our companion federal specification precision locating pin range.
View FF-P-386 →Fasteners Manufacturer & Exporter to the USA
Our broader capability manufacturing to ASTM/ASME and US federal standards.
View USA Export Guide →Need the Right
Head Style & Drive Type?
Send us your assembly requirement, size, and material — we’ll confirm the correct head style and drive type combination and quote across our full range. Akbar Fasteners Pvt. Ltd. responds within 24 hours.
Sales: +91 724 0000 733 · Support: +91 800 9315 333 · sales@akbarfasteners.in