FF-S-111
Wood Screws
Mumbai · India
Why Wood Screws Are Genuinely a Different Fastener
A wood screw’s design solves a problem neither machine screws nor metal tapping screws face — wood fiber compresses and grips around a fastener differently than sheet metal or a machined thread ever does. That’s why a genuine wood screw has a tapered shank that’s unthreaded near the head, a coarser thread pitch running only along the lower portion of the shank, and a sharp gimlet point designed to start the screw into the wood grain with minimal splitting, rather than needing a pre-cut thread or a self-drilling tip.
The unthreaded shank section matters more than it might look — it lets the screw’s threaded portion draw the two pieces of wood tightly together as it seats, rather than the thread engaging along the entire shank length and simply advancing without pulling the joint closed. Substituting a machine screw or metal tapping screw for genuine wood screw duty loses that clamping action and the gimlet point’s clean-starting behavior, both of which matter for a joint that actually needs to hold tightly in wood.
Akbar Fasteners Pvt. Ltd. exports to over 50 countries, and our wood screw range is manufactured with the correct tapered shank, coarse thread pitch, and gimlet point geometry, verified under our ISO 9001:2015 quality system.
Where FF-S-111 Genuinely Applies
Genuine Wood-Joint Clamping Action
Tapered, unthreaded shank draws mating pieces of wood tightly together as the screw seats.
Gimlet Point Starts Cleanly
Sharp point geometry reduces splitting risk when driving into wood without a pilot hole.
Unambiguous Federal Specification
Removes ambiguity in federal purchase orders needing a defined wood screw standard.
Multiple Material & Finish Options
Steel, brass, and stainless options across common head styles and drive types.
Wood Screw Head Style Options
Countersunk Flat Head
Sits flush with the wood surface once fully driven, for a clean fastened appearance.
Countersunk Oval Head
Domed top over a countersunk base, common for decorative or visible fastening.
Domed Round Head
Sits proud of the surface, useful where countersinking isn’t required or desired.
Wood Screws vs Tapping Screws vs Machine Screws
Confirming which fastener class actually fits the base material avoids specifying a screw that can’t hold the joint properly. This table is the quick reference we use with buyers before quoting.
| Property | FF-S-111 Wood Screw | FF-S-200 Tapping Screw | FF-S-210 Machine Screw |
|---|---|---|---|
| Base Material | Wood | Sheet metal, plastic | Tapped hole or nut |
| Shank Design | Tapered, partly unthreaded | Parallel, fully threaded | Parallel, fully threaded |
| Point Type | Gimlet point | Sharp/drilling point | Flat/no point (blunt) |
| Clamping Action | Draws pieces together | Limited (parallel thread) | Full (with nut/tapped hole) |
FF-S-111 Specification Details
Materials We Manufacture In
- Carbon Steel Plain / Zinc Plated
- Brass Decorative Applications
- Stainless Steel 304 / 316
- Finish Plain / Nickel / Zinc
Wood Screw Geometry
- Shank Tapered, Partly Unthreaded
- Point Gimlet (Sharp)
- Thread Pitch Coarse
- Testing Dimensional Verified
Available Dimensions
- Nominal Size #2 – #14 (Gauge System)
- Length Custom to Application
- Custom Sizes On Request
- Drive Type Slotted / Cross-Recessed
Application Areas
Wherever a genuine wood-to-wood clamping joint is the actual requirement.
Furniture & Cabinet Assembly
fastening in furniture
Timber Construction
timber fastening
Government Infrastructure
wood hardware needs
Decking & Outdoor Structures
for outdoor durability
Interior Fit-Out & Trim
and molding fastening
Marine Woodwork
for boat and marine woodwork
Hardware & Hinge Fixing
into wood substrates
General Woodworking
federally specified wood projects
Standard Export Documentation
Prepared as standard practice for every FF-S-111 wood screw shipment.
Mill Test Certificate (MTC)
Heat number, chemical composition, and mechanical property verification for every lot.
Certificate of Conformance
Confirms the shipment matches the purchase order head/material specification in full.
Dimensional Inspection Report
Verification of shank taper, thread pitch, and point geometry for correct performance.
Certificate of Origin (COO)
Confirms India as country of manufacture for destination customs purposes.
NABL Accredited Test Reports
Independent mechanical and dimensional testing available on request for critical applications.
Commercial Invoice & Packing List
Itemized value, Incoterm, and detailed carton/weight breakdown for customs clearance.
Internationally Recognised Standards Coverage
Related Fastener Grades & Materials
FF-S-200 Tapping Screws
The self-tapping screw specification for sheet metal and plastic instead of wood.
View FF-S-200 →FF-S-210 Machine Screws
The general machine screw specification requiring a pre-tapped hole or nut.
View FF-S-210 →FF-W-84 Key Washers
Countersunk finishing washers, often paired with flat or oval head wood screws.
View FF-W-84 →Fasteners Manufacturer & Exporter to the USA
Our broader capability manufacturing to ASTM/ASME and US federal standards.
View USA Export Guide →Need a Genuine
Wood-Joint Clamping Screw?
Tell us your head style, drive type, and material requirement — we’ll confirm specification and quote across our full wood screw range. Akbar Fasteners Pvt. Ltd. responds within 24 hours.
Sales: +91 724 0000 733 · Support: +91 800 9315 333 · sales@akbarfasteners.in